MyJEEPforum.com



 
HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  RegisterRegister  Log inLog in  

Share | 
 

 Fill Plug on a Dana 300 t-case

View previous topic View next topic Go down 
AuthorMessage
bob_prtda
Trail Ready
Trail Ready
avatar

Number of posts : 78
Age : 34
Location : Hoodway, TX
Rig : 81 CJ5
specs. : Stock, but working my way up
Registration date : 2009-04-25

PostSubject: Fill Plug on a Dana 300 t-case   Tue 07 Jul 2009, 7:37 pm

Does anybody know were the fill plug on a dana 300 t-case is? Mine has a slow leak, was under the jeep this morning but all i could find was the one for my trans.
Back to top Go down
View user profile
WARDEN



Number of posts : 7
Location : lorena,tx
Rig : cj5
specs. : junk yard special
Registration date : 2009-03-14

PostSubject: Re: Fill Plug on a Dana 300 t-case   Thu 09 Jul 2009, 12:41 pm

looking from the rear it should be a square head pipe plug about 1/2 way between your front and rear output shafts. hope this helps
Back to top Go down
View user profile
bob_prtda
Trail Ready
Trail Ready
avatar

Number of posts : 78
Age : 34
Location : Hoodway, TX
Rig : 81 CJ5
specs. : Stock, but working my way up
Registration date : 2009-04-25

PostSubject: Re: Fill Plug on a Dana 300 t-case   Mon 13 Jul 2009, 9:53 am

That helped out a lot. Thanks. Now I wont burn up my t-case.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Fill Plug on a Dana 300 t-case   

Back to top Go down
 
Fill Plug on a Dana 300 t-case
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Transmission & gear-case fill, drain and oil
» Transfer case drain plug stripped?
» Dumb question: where is crankcase breather plug?
» Engine drain plug?
» How to replace front fork oil when there is no filler plug ?!

Permissions in this forum:You cannot reply to topics in this forum
MyJEEPforum.com :: JEEP TECH :: Stock Options-
Jump to: