MyJEEPforum.com



 
HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  RegisterRegister  Log inLog in  

Share | 
 

 Overkill Engineering...

View previous topic View next topic Go down 
Go to page : 1, 2  Next
AuthorMessage
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Overkill Engineering...   Thu 12 Nov 2009, 7:10 pm

OK...payment all squared away...expected to ship out at the end of next week...and installed on my Jeep by Nov 28th of this year or sooner.

Yep, thats the plan...lets hope it goes that easy.

So, what is it....their front fender replacements:




Note: image stolen from Rooster via http://www.jkowners.com/forum/showthread.php?t=17444

I'm getting the front only.

The basic rear was quoted to me for $965! One could get ORO armor (front and rear) for $165 cheaper! I couldn't justifiy the price, if I'm just gonna cut it up later for the rear comp cut

...and for those interested, I've been in contact w/Mark Nobles (sp) of Overkill and he has been very informative and helpful.

so far...a big thumbs up for their customer service.

I will report back, when they get shipped and so forth


EDIT: the above above appeared to be all true UNTIL CC INFO WAS OBTAINED....stay tuned


Last edited by TxRubiRig on Wed 02 Dec 2009, 3:00 pm; edited 1 time in total
Back to top Go down
View user profile
N2rock
UBER ass wipe
avatar

Number of posts : 3056
Age : 52
Location : Sugar Land, TX
Rig : '07 Unlimited
Registration date : 2008-04-14

PostSubject: Re: Overkill Engineering...   Thu 12 Nov 2009, 7:12 pm

those fronts are just SICK!!! Damn you!!!
Back to top Go down
View user profile http://n2rock.com
Mr.RonGilbert
10" SUPER LOGGER
avatar

Number of posts : 2701
Age : 47
Location : Mt. Belvieu, Texas
Rig : 08 Black Unlimited
specs. : Its a beater!
Registration date : 2009-01-18

PostSubject: Re: Overkill Engineering...   Thu 12 Nov 2009, 8:32 pm

I think it's overkill..... just sayin..
Back to top Go down
View user profile
terrahawk
Got No Life
Got No Life
avatar

Number of posts : 1593
Age : 48
Location : Richmond, TX
Rig : 2007 Sahara dos puertas
Registration date : 2008-03-30

PostSubject: Re: Overkill Engineering...   Thu 12 Nov 2009, 8:57 pm

Being a PI, Joe needs the stealth effect these will provide to keep the marriage cheaters and insurance fraud types in the dark to his presence!

Two thumbs up! deadkenny just because I like Kenny lol
Back to top Go down
View user profile
RubiconAg
Straight off the lot
Straight off the lot
avatar

Number of posts : 40
Location : College Station, TX
Rig : 2004 TJ Rubicon
Registration date : 2009-10-06

PostSubject: Re: Overkill Engineering...   Sat 21 Nov 2009, 6:28 pm

I'm running Overkill front fenders w/ integrated flare on my TJ and I really like them. The only problem I have with mine is when I stuff the tire into the fender, the cutout for the LED marker lights cuts chunks out of the outter tread on my tires. I hope to get matching rear flares some day.






Back to top Go down
View user profile
Guest
Guest



PostSubject: Re: Overkill Engineering...   Sat 21 Nov 2009, 7:33 pm

Mr.RonGilbert wrote:
I think it's overkill..... just sayin..

I take offense to that statement.














.
Back to top Go down
Mr.RonGilbert
10" SUPER LOGGER
avatar

Number of posts : 2701
Age : 47
Location : Mt. Belvieu, Texas
Rig : 08 Black Unlimited
specs. : Its a beater!
Registration date : 2009-01-18

PostSubject: Re: Overkill Engineering...   Sat 21 Nov 2009, 8:26 pm



That is a whole new level of "overkill"!

Mad Max style!
Back to top Go down
View user profile
JK-fredd0
Got No Life
Got No Life
avatar

Number of posts : 812
Age : 43
Location : San Antonio
Rig : 2007 JK Unlimited Sahara
Registration date : 2009-01-26

PostSubject: Re: Overkill Engineering...   Sat 21 Nov 2009, 10:14 pm

how much are the fronts? i can't find it on thier website. #1 pet peeve is no prices on a website...
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Sat 21 Nov 2009, 11:15 pm

JK-fredd0 wrote:
how much are the fronts? i can't find it on thier website. #1 pet peeve is no prices on a website...

well, there in lies my 1st issue

...and now the 2nd, from the quote given to me over the phone $667 (inc shipping) but my CC statement has been hit for $701.98...I've emailed but don't have a response yet...come Monday, I will start the calling
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Tue 01 Dec 2009, 6:21 pm

IF ANYONE IS THINKING OF PURCHASING...HOLD OFF!

I will explain and update later


...just my warning, as things aren't looking so good


Last edited by TxRubiRig on Tue 01 Dec 2009, 9:54 pm; edited 1 time in total
Back to top Go down
View user profile
JK-fredd0
Got No Life
Got No Life
avatar

Number of posts : 812
Age : 43
Location : San Antonio
Rig : 2007 JK Unlimited Sahara
Registration date : 2009-01-26

PostSubject: Re: Overkill Engineering...   Tue 01 Dec 2009, 6:48 pm

i just read some stuff on this company. i would look at poison spider instead
Back to top Go down
View user profile
CJATE
Trail Ready
Trail Ready
avatar

Number of posts : 88
Age : 39
Location : Waco
Rig : 83 Scrambler
specs. : SOA, locked, twinsticked, 35" Krawlers, leaks just about everything
Registration date : 2009-07-05

PostSubject: Re: Overkill Engineering...   Tue 01 Dec 2009, 7:38 pm

buddy just recived several things from them, i'll ask how his order went
Back to top Go down
View user profile http://www.CoachMorrison.com
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 2:58 pm

able to make BRIEF contact via email this morning...Mark stated he would be getting back to me "shortly"

4 hrs 2 mins left
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 3:00 pm

FWIW...I truely how all ends well and SOON
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 5:11 pm

CANCELLED ORDER...TOTAL REFUND EXPECTED...

2:31 PM I missed a call from Mr. Nobles.

2:37 PM I called Mr. Nobles back. The price difference was said to be in the shipping. He quoted me from Business to Business, as thats who he usually works with. He stated that it was flagged by the "girls down stairs" and he got the information last night as a hold was put on the order. FYI, the diffence was only about $30 or so...it was the principle of the thing for me...had it been quoted what I was charged, I still would've ordered from them. OK...a minor shipping charge change...my account was billed anyways and then they put a "hold" on my order??? I inquired again about when it would be shipped out and was told that it usually takes 2 weeks. I was then asked what I wanted to do. I elected to cancel and obtain my full refund (as the whole process and my research after the fact has left a bad taste in my mouth).

I did sent Mr. Nobles and company a brief email afterwards, confirming our conversation and the refund.

I also told him that if the item becomes readily available, I might still be interested IF it were shipped COD.

So thats it...hopefully nothing more will come of it and my credit will show back up today or tomorrow.
Back to top Go down
View user profile
Mr.RonGilbert
10" SUPER LOGGER
avatar

Number of posts : 2701
Age : 47
Location : Mt. Belvieu, Texas
Rig : 08 Black Unlimited
specs. : Its a beater!
Registration date : 2009-01-18

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 5:55 pm

Damn dude.... hope it all works out


which direction are you going now?
Back to top Go down
View user profile
Bizarro
Golden Child
avatar

Number of posts : 614
Age : 43
Location : League City
Rig : Yellow '08 JK 4 door
specs. : 3" Teraflex lift, 35x12.5x17 KM2
Registration date : 2009-02-14

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 6:31 pm

So was there anything wrong with the company or parts? Would you have gotten it if they had better customer service?

I wonder if I call to order it if I can get a discount cause they want to get rid of it now?!
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 11:47 pm

Bizarro wrote:
So was there anything wrong with the company or parts? Would you have gotten it if they had better customer service?

I wonder if I call to order it if I can get a discount cause they want to get rid of it now?!

ya gotta build it to get rid of it
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 02 Dec 2009, 11:49 pm

I'm gonna give them a 2nd chance...so stay tuned
Back to top Go down
View user profile
terrahawk
Got No Life
Got No Life
avatar

Number of posts : 1593
Age : 48
Location : Richmond, TX
Rig : 2007 Sahara dos puertas
Registration date : 2008-03-30

PostSubject: Re: Overkill Engineering...   Thu 03 Dec 2009, 12:03 am

Personally, I would be calling Kenny at River Raider and getting front narrow tube fenders and comp cut (since you plan on doing that) corners for just a little bit more.

Just saying....

And you WON'T get screwed!
Back to top Go down
View user profile
Mr.RonGilbert
10" SUPER LOGGER
avatar

Number of posts : 2701
Age : 47
Location : Mt. Belvieu, Texas
Rig : 08 Black Unlimited
specs. : Its a beater!
Registration date : 2009-01-18

PostSubject: Re: Overkill Engineering...   Thu 03 Dec 2009, 1:14 am

Kenny will build it however you want it. I sent a note and he basically countered with - you dream it I will make it.
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Wed 03 Feb 2010, 7:21 pm

Well guess what?

Wait, the reason for the 2nd chance was due to Mark H stating that he would throw in a free pair of rear skinz...So, I've stuck around...

...and got pissed...stuck around...got the run around...and got pissed....stuck around some more...got pissed...Brandi gett'n upset too...got the run around...well ya see a pattern, huh

(I have approx 50 emails going back and forth with company!)

So today, I had enough and gave them a choice of shipping my order or I expect a refund in my account by the end of the day tomorrow...

Well 3 hours later...I get email saying order is shipped and I got a tracking # too (to soon get the # pulled up on the freight company website)

But it appears I will finally start to be able to do some more mods to the Jeep...or I might end up just selling the fenders...lol

George, ya got a package coming sometime soon!
Back to top Go down
View user profile
jkx0778
Pathetic
Pathetic
avatar

Number of posts : 2490
Age : 39
Location : San Antonio, TX
Rig : 2008 unlimited
specs. : in progress
Registration date : 2008-01-29

PostSubject: Re: Overkill Engineering...   Wed 03 Feb 2010, 8:18 pm

i was interested in the rear corners or offroad evo rear outlaw armor.
Back to top Go down
View user profile
TxRubiRig
Rancho lift lover
avatar

Number of posts : 1278
Age : 43
Location : Katy now
Rig : black '07 Rubicon
specs. : 4.5" Long Arm, 35 KM2's
Registration date : 2008-04-15

PostSubject: Re: Overkill Engineering...   Thu 04 Feb 2010, 1:42 am

jkx0778 wrote:
i was interested in the rear corners or offroad evo rear outlaw armor.

As of right now, I would say go with RiverRaider
Back to top Go down
View user profile
terrahawk
Got No Life
Got No Life
avatar

Number of posts : 1593
Age : 48
Location : Richmond, TX
Rig : 2007 Sahara dos puertas
Registration date : 2008-03-30

PostSubject: Re: Overkill Engineering...   Thu 04 Feb 2010, 11:55 am

I'll not comment for fear of the ban hammer.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Overkill Engineering...   

Back to top Go down
 
Overkill Engineering...
View previous topic View next topic Back to top 
Page 1 of 2Go to page : 1, 2  Next
 Similar topics
-
» mainly engineering
» FS: GReddy Spec-M fmic, Synapse Engineering BOV, S14 mirrors
» SOLD: Ziegel Engineering Pistol Box
» You have to love bush engineering
» RTR Automotive Engineering

Permissions in this forum:You cannot reply to topics in this forum
MyJEEPforum.com :: JEEP TECH :: Modified Tech-
Jump to: