MyJEEPforum.com



 
HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  RegisterRegister  Log inLog in  

Share | 
 

 so here's my heep

Go down 
Go to page : Previous  1, 2
AuthorMessage
shawn
Trail Ready
Trail Ready


Number of posts : 53
Age : 43
Location : portland, tx
Rig : 88 cherokee 4dr 4.0l auto
specs. : 4.5" lift, 35" tires, custom bumpers
Registration date : 2010-05-09

PostSubject: Re: so here's my heep   Sun 23 Dec 2012, 8:48 pm

so a little progress has been made

finally built the mounts for the grand cherokee seats i bought over a year ago



and i finally finished welding up the hood. just needs some bondo to clean it up





primered the underside of the hood and the back side of the replacement fender today. tomorrow they're getting some color then bolted on permanently so i can paint the whole jeep

also finally finished the front axle mounts and got it cleaned up and painted



putting gears in sometime this week and bolting it under the jeep for the last time hopefully by friday. waiting to get my motor in before i finish the steering and hopefully that should be done within a couple weeks. still need to pull the 14b out so i can blast,paint, and install gears but for now that's no important. i need to get the entire jeep sanded down before sunday so i can shoot primer monday and paint on tuesday.....not looking forward to prepping the jeep for paint


oh and i'll just leave this here and let ya'll wonder

Back to top Go down
View user profile
shawn
Trail Ready
Trail Ready


Number of posts : 53
Age : 43
Location : portland, tx
Rig : 88 cherokee 4dr 4.0l auto
specs. : 4.5" lift, 35" tires, custom bumpers
Registration date : 2010-05-09

PostSubject: Re: so here's my heep   Fri 04 Jan 2013, 9:06 pm

well she's sitting on 4 wheels again finally. still need to order brake lines and pick up a couple tre's for my tie rod but the front is basically done. once i get the engine in i'll finish welding and painting my steering



Back to top Go down
View user profile
r_unda
Seasoned Vet
Seasoned Vet
avatar

Number of posts : 794
Age : 35
Location : Corpus Christi, TX
Rig : 1998 Jeep Wrangler
specs. : 2.5L-4 Cyl., 33x10.5 BFG's Mud tires, 2.5 in. lift springs, 1.25 in. BL, 1 in. MML, 4.88 Gears, Front Powertrax No-Slip, Rear E-Locker, Chromoly axle shafts, SYE, Tera Low & 2Low, UCF Tummy Tuck, etc
Registration date : 2010-03-12

PostSubject: Re: so here's my heep   Fri 04 Jan 2013, 10:46 pm

Great job Shawn!
Back to top Go down
View user profile
Maverick1701
Jack Twist
avatar

Number of posts : 909
Age : 32
Location : Memphis, TX
Rig : 1968 Kaiser Jeep M35A2 6x6
specs. : ITS BIG!!!!!
Registration date : 2009-02-11

PostSubject: Re: so here's my heep   Mon 07 Jan 2013, 2:16 am

very cool rig! Love the progress pics
Back to top Go down
View user profile http://www.lemonparty.org
shawn
Trail Ready
Trail Ready


Number of posts : 53
Age : 43
Location : portland, tx
Rig : 88 cherokee 4dr 4.0l auto
specs. : 4.5" lift, 35" tires, custom bumpers
Registration date : 2010-05-09

PostSubject: Re: so here's my heep   Sat 26 Jan 2013, 12:17 am

well the engines finally built



so is it bright enough for you?



still have to clean and paint the oil pan and valve cover. these are on there to keep paint out of the engine

it goes in this weekend
Back to top Go down
View user profile
shawn
Trail Ready
Trail Ready


Number of posts : 53
Age : 43
Location : portland, tx
Rig : 88 cherokee 4dr 4.0l auto
specs. : 4.5" lift, 35" tires, custom bumpers
Registration date : 2010-05-09

PostSubject: Re: so here's my heep   Sun 27 Jan 2013, 6:03 pm

well it's in....



going to try and get the trans/transfer case sealed up, bolted back together and back in the jeep this week. still gotta figure out what i'm going to do about fuel and i picked up a 4.7 throttle body that i need to either make an adapter for or see if i can mount it too the intake
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: so here's my heep   

Back to top Go down
 
so here's my heep
Back to top 
Page 2 of 2Go to page : Previous  1, 2

Permissions in this forum:You cannot reply to topics in this forum
MyJEEPforum.com :: JEEP TECH :: Let's see 'em - SHOW YOUR RIGS!-
Jump to: