MyJEEPforum.com



 
HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  RegisterRegister  Log inLog in  

Share | 
 

 Need a gear, and a source.

View previous topic View next topic Go down 
AuthorMessage
hughiam

avatar

Number of posts : 5
Age : 52
Registration date : 2011-11-29

PostSubject: Need a gear, and a source.   Tue 24 Jan 2012, 10:33 pm

I have a cj7 with an AMC 401-AMC Turbo 400-Dana 20 Transfer case.(its out of several Wagoneers from around 77-79) In between the Trans/TC there is after market adapter by Advance which replaces the factory adapter. The shaft that comes out of the Trans has a gear on it with 15 spline inside and 26 teeth on the outside. This meshes the adapter to the TC. The factory number of the original piece is 946785. It also has a stamp on it with N45 18 8 40. That gear is trashed and NO ONE seems to have one. The factory number is obsolete, Advance doesn't carry it(they say use your original). 25 calls to junk yards around the nation have produced nothing.

So, does anyone have any leads I could chase? The thought of cruising junkyards hoping to find a wagoneer with this engine/trans/tc is overwhelming.

Thanks in advance

Hugh
Back to top Go down
View user profile
CJTJ
Trail Ready
Trail Ready
avatar

Number of posts : 63
Age : 42
Location : Marion
Rig : Jeep tj
specs. : Abunch of cheap chrome crap from Autozone
Registration date : 2010-09-10

PostSubject: Re: Need a gear, and a source.   Tue 24 Jan 2012, 11:34 pm

You may want to check with Geoff with San Antonio Jeep Exclusive. He wheels and deals alot of used parts from the club. His # is on the site in the "Our Jeeps" section.
Back to top Go down
View user profile
hughiam

avatar

Number of posts : 5
Age : 52
Registration date : 2011-11-29

PostSubject: Re: Need a gear, and a source.   Sat 04 Feb 2012, 12:45 am

I ended up finding one in California. JW's Jeep salvage yard. They have everything.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Need a gear, and a source.   

Back to top Go down
 
Need a gear, and a source.
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Source for plastic odometer gear?
» New odometer gear source
» 4t65...what commands 4th gear?
» BIG RED GEAR REDUCTION
» 5th Gear Swap (.pdf)

Permissions in this forum:You cannot reply to topics in this forum
MyJEEPforum.com :: JEEP TECH :: Modified Tech-
Jump to: