Houston Install party- list

i dont have anything to put on, but will be glad to help where i can.

skoalman wrote:

Steve, after we are done, will these fit okay??

LT285/70R17, BFGoodrich Mud-Terrain T/A KM2 Overall Diameter: = 33

On stock wheels? If on stock wheels, you might need wheel spacers. But likely they will be fine.

Yes

Steve, after we are done, will these fit okay??

LT285/70R17, BFGoodrich Mud-Terrain T/A KM2 Overall Diameter: = 33

I wanted to put on my diff covers front and back as well as remove the BB bumpstop extensions on the front. Aside from that - I can help out wherever with the wrenching.

i've got a "surplus" jack from discount tire. one of those big red ones. and a few jack stands i'll bring.

I don't have anything to add to mine, so I'll help out where I can. I'll bring my floor jack and jack stands.

N2rock wrote:

Jody
Chop the hell out of his rear corners (whoever has the nerve to do it).

im yer huckleberry


shoot, i dont have a problem cutting up my own junk and IM paying for it

I can help C relocate the shock brackets, all we need is a grinder. I think I have a countersink some where too.

Wow, we have a lot to do!

I'll be bringing my floorjack along with jackstands. Anyone else that has these, please bring too.
Hopefully we'll avoid any real rain between now & then so that the ground will be hard because it sounds
like we're going to need to have multiple rigs in the air at the same time. I'm not sure of everyone's
wrenching abilities, but I think I have a good idea.

Me
Raise Bumper (Geo)
Mount tire carrier (Geo)

Skoalman
RC lift (me and Skoalman)
Evap skid (Jody and Skoalman)

Hutch
¾” spacer (Txcrawler & Hutch)
Steering Stabilizer (Txcrawler & Hutch)
Trim Rubi Rails (Geo)

jkdrone
front shocks (Jkdrone and anyone)
adjustable rear sway bar (jkdrone & anyone)
extract a broken bolt from rear diff cover (Geo)
Relocate rear shock brackets (Geo if time)

Joe
rotate the swaybar motor up (Joe & anyone)

Rescue1
BB & ¾” spacer (Rescue1 and me or Jody or Joe or Jkdrone or Txcrawler)

Jason
1.75" spacers (Jason and me or Jody or Joe or Jkdrone or Txcrawler)

Jody
Chop the hell out of his rear corners (whoever has the nerve to do it).

terrahawk wrote:

Who wants to cut holes in my corner panels, like this:

WOW !!!! kinda extreme measure to get to the wiring just to add the towing wiring harness !!
but really, what's that about? i thought crusher corners just installed on top of the sheet metal?

i've got a .75" front spacer and 2" BB to put on, but Geo has some of the parts for it.

my buddy Jason will be putting on 1.75" spacers

terrahawk wrote:

Who wants to cut holes in my corner panels, like this:

I've got a dremel tool and a jigsaw =)

!c

Who wants to cut holes in my corner panels, like this:

Um, there's always crap/stuff to be done w/mine...but I would like to rotate the swaybar motor up (i think I have the room w/the new bumper not getting in the way)

don't forget to post up pics guys. group shots too !!

skoalman wrote:

Hutch wrote:

I have 3/4" front spacers, steering stabilizer (if it comes in) & I'd like to trim a couple of inches off the end of the Rubi rails.

It took us long enuff, but we gettin in the groove brutha, we gettin in the groove.

Spinners are next...........

Tru dat

Hutch wrote:

I have 3/4" front spacers, steering stabilizer (if it comes in) & I'd like to trim a couple of inches off the end of the Rubi rails.

It took us long enuff, but we gettin in the groove brutha, we gettin in the groove.

Spinners are next...........

I need to put on front shocks, an adjustable rear sway bar, and extract a broken bolt from rear diff cover.

I think only the third needs geo/welding, I can do the first two by myself, but the shocks would go easier with a hand (non-expert =)

IF there happens to be enough time, I wouldn't mind relocating my rear shock brackets up an inch or two, but that's no emergency.

BTW, I'd love to see that rear tire carrier! I just removed my whole tire carrier assembly as the extension bracket snapped in half, and only one lug was holding the whole spare on, and now I have no cargo space.

!c

I have 3/4" front spacers, steering stabilizer (if it comes in) & I'd like to trim a couple of inches off the end of the Rubi rails.

I dunno If I will have anything to install yet But I Will be able to help with most anything there is.

I also have a set of fender flares that I can bring if anybody needs them...

I'd like to do my lift, the Rough Country with the JKS disco's - as well as my evap skid (that should be pretty easy).

I can enlist Steve at a later date to help with my CB and antenna install, but will bring it just in case he is not completely dead at the end of the day............

Let's get a list of what everyone hopes to get done, and start determining who can do what (there's only so much of Geo to go around).

I need to get my rear bumper raised up, and the RockRash tire carrier mounted to it. Both of those will require Geo's expertise as welding is involved.

I can help with any BB's (I'll bring my floor jack, tools, and jack stands), and also can help with any CB or light installs.