cab floor herculined (pix 56k warning)

Obviously its not on a JK but I figured someone might want to line the interior of their jeep eventually

Here is my "walkthrough"

I got super tired of cleaning the carpet in my truck so I decided to pull it and apply herculiner down inside the cab.
It turned out very well and looks really sharp. I also installed the center console out of an 08 super-duty

It is pretty simple but here are my steps:
1. The project started be pulling the seats, belts, and lower parts of the interior trip.
2. I used a sanding attachment and a scotch brite pad to prep the surface then cleaned w/acetone
3. I used 2 coats (there was a vast improvement between the 1st and 2nd coat)
Once it dried the granulation/particles in the liner evened out and it looks GREAT now


Seats out


Sanding


Coat #1


Coat #2


Finished product (FYI-the seat is reclined a lot so it looks a little funky)

Nice work

I plan on doing the U-Pol Raptor kit like that to my TJ at some point. Probably the first time the carpets are ruined

Deacon wrote:

I plan on doing the U-Pol Raptor kit like that to my TJ at some point. Probably the first time the carpets are ruined

I have heard good things about the raptop kit. Its pretty easy to do...just gotta make sure you prep like a madman otherwise it will peel and look like crap

Oh yeah, definitely. I think some sanding pads in a drill or air tools will work well to keep the tedium to a minimum.