Houston Install Party

well guys the date and place is up to you! I am thinking Sometime in Feb. Like I said I am offering our place we have plenty of tools..lol

you guys set the date and we will work out the rest of the details.

Jen

Shocks finally got here today...after two months

redneckhouston wrote:

well guys the date and place is up to you! I am thinking Sometime in Feb. Like I said I am offering our place we have plenty of tools..lol

you guys set the date and we will work out the rest of the details.

Jen

How about the last weekend of Feb? That gives everyone plenty of time to purchase anything they plan to.

G loves 'em, so start a poll

N2rock wrote:

How about the last weekend of Feb? That gives everyone plenty of time to purchase anything they plan to.

Sounds good to me.. hopefully my Shrocks rear bumper and carrier will be in by then.. I ordered it back on Sept 03

N2rock wrote:

redneckhouston wrote:

well guys the date and place is up to you! I am thinking Sometime in Feb. Like I said I am offering our place we have plenty of tools..lol

you guys set the date and we will work out the rest of the details.

Jen

How about the last weekend of Feb? That gives everyone plenty of time to purchase anything they plan to.

perfect for me.

Steve is buying us all 40's, so we need to wait for Interco to deliver those to his house.

terrahawk wrote:

Steve is buying us all 40's, so we need to wait for Interco to deliver those to his house.

Don't forget your part of the arrangement- a set of seats just like yours for everyone.



ooops... I forgot it was a secret and you were going to surprise everyone

Well played sir!

terrahawk wrote:

Shocks finally got here today...after two months

So... I have to ask... What are you going to destroy these ones on? =))

!c

jkdrone wrote:

terrahawk wrote:

Shocks finally got here today...after two months

So... I have to ask... What are you going to destroy these ones on? =))

!c

These F'rs have a 7/8 inch shaft!

terrahawk wrote:

These F'rs have a 7/8 inch shaft!

A 7/8" shaft? They make pills for that, ya know =)

!c

OK So lets say Feb. 27th ..........Sound Good to everyone?

Jody I don't think we will be able to do your stuff that day lol. It's a tad bit too much work. But we can do it before then. and if I get my breaks you can barrow betty while G works on your junk.

That gives us a few weeks to get the other side of the shop cleaned out so we have 2 bays to work in. Yep thats our next big project. Getting the shop cleaned.

I almost forgot, i do have something to install its just not a mod, i need to replace my rear brakes. if i use a better than stock pad does that count as a mod?

goldenboy wrote:

I almost forgot, i do have something to install its just not a mod, i need to replace my rear brakes. if i use a better than stock pad does that count as a mod?

Dude- 15 minutes in your driveway is all you need.

And ANY pad is better than stock LOL

N2rock wrote:

Dude- 15 minutes in your driveway is all you need.

And ANY pad is better than stock LOL

Yeah thats what i was reading on JKO. the last time i changed brakes was on a lumina i had and i didn't know you needed some special wrench to turn the caliper back in. i hammered away on them with a 2x and hammer. neadless to say a tow truck ride and about $400 later i had had some new professionally installed calipers and pads.

goldenboy wrote:

N2rock wrote:

Dude- 15 minutes in your driveway is all you need.

And ANY pad is better than stock LOL

Yeah thats what i was reading on JKO. the last time i changed brakes was on a lumina i had and i didn't know you needed some special wrench to turn the caliper back in. i hammered away on them with a 2x and hammer. neadless to say a tow truck ride and about $400 later i had had some new professionally installed calipers and pads.

Special wrench? Nah... A large C-clamp pick up at any hardware store for a few bucks.

gotta do it quick or the pistols close on ya

I would like to get in on this if possible. I have a teraflex 2.5 coil lift and a front adjustable track bar that I need to install. I am definitely not the Charlie Daniels of the torque wrench but I used to be able to lift heavy things. I have some jack stands, floor jack, etc. Thanks.

Is the Feb 27th still on, or did the fire burn up this plan? hehe If it is still on I am in.

1/2" spacer for front coils
adjustable trackbar
SS relocation bracket and SS
tune the CB
LED rock light kit is the lowest priority if we have time

I guess it's still on. This is up to you guys!

I tell ya what..... I will set this in stone!

Feb. 27th 2010

Our place! Bring your own food and drinks we can light the pit if ya want!

if you bring your own tools, keep up with them!

Bring chairs!

PM me if you don't know where we live!

See you all here next month!

I got the buns again!

im free to help turn wrenches

cool lets get a list going of what all needs to be done!