SA Install (June 25th)

Gotta work next weekend but hope to stop by!

You should see the welds Jeff did on MArshalls jeep, they are beautiful!!

I'm gonna stop by and probably get in the way lol... nothing to install but need some advice on some seats and brackets I bought.

planning on being there, mainly just in the way.

will try to bring the big fan. any tools needed, txt or call me (can't do much on here from phone)

Bring the welder, Jeff. Have some work for you.
I need some welding done on my rear tire carrier.
Also want to weld a nut in my frame for me transmission skid plate. Right now it is loose and a pain in the arse to fasten it, once I uninstall my skid plate.

Anyone bringing a socket big enough for the flange nut on the t-case? I gots me a front drive shaft to install.

jkx0778 wrote:

Anyone bringing a socket big enough for the flange nut on the t-case? I gots me a front drive shaft to install.

For the record, I think the size is a 35 mm. The biggest I have in my arsenal is a 33 mm for the pitman arm. Sorry I wasn't of more help.

Hook-Em wrote:

jkx0778 wrote:

Anyone bringing a socket big enough for the flange nut on the t-case? I gots me a front drive shaft to install.

For the record, I think the size is a 35 mm. The biggest I have in my arsenal is a 33 mm for the pitman arm. Sorry I wasn't of more help.

http://project-jk.com/jeep-jk-write-ups/jeep-jk-wrangler-coast-front-1310-drive-shaft-installation-write-up

On the above write up is mentions 1 1/8 and 1 1/4 sockets, of which I have both. So will bring along.
I thought the Transfer case nut was 29MMand axle side 32MM?

Dutchboy101 wrote:

Bring the welder, Jeff. Have some work for you.
I need some welding done on my rear tire carrier.
Also want to weld a nut in my frame for me transmission skid plate. Right now it is loose and a pain in the arse to fasten it, once I uninstall my skid plate.

K

Bobby bought a big wrench, it is a 1 1/8" And 1 1/2" (box end)

We will be BBQ'in hamburgers and hotdogs, let us how many in your group so we know how much to buy, we will also have some water but bring your own soda, beer etc. Anyone want to bring a desert?

It'll be me and my young'n, Allysen. She'll put a hurt on one of those hot dogs. I'll bring some M&M cookies. Who knows, I might even leave some for others to eat

Here's a tally list. Copy& paste and add your name to the bottom.

David & Allysen

Dutchboy101 wrote:

Hook-Em wrote:

jkx0778 wrote:

Anyone bringing a socket big enough for the flange nut on the t-case? I gots me a front drive shaft to install.

For the record, I think the size is a 35 mm. The biggest I have in my arsenal is a 33 mm for the pitman arm. Sorry I wasn't of more help.

http://project-jk.com/jeep-jk-write-ups/jeep-jk-wrangler-coast-front-1310-drive-shaft-installation-write-up

On the above write up is mentions 1 1/8 and 1 1/4 sockets, of which I have both. So will bring along.
I thought the Transfer case nut was 29MMand axle side 32MM?

Thanks Sash. Now, anyone got a part puller? I'll bring my air hammer and fork.

Dutchboy101 wrote:

Hook-Em wrote:

It'll be me and my young'n, Allysen. She'll put a hurt on one of those hot dogs. I'll bring some M&M cookies. Who knows, I might even leave some for others to eat

Here's a tally list. Copy& paste and add your name to the bottom.

David & Allysen
Sascha X1
Richard x1

Jon has a gear puller. But you can always loan one from Autozone.

jkx0778 wrote:

Anyone bringing a socket big enough for the flange nut on the t-case? I gots me a front drive shaft to install.

whatcha doing with the old one?

Well, I found the address on map quest, photo'd to the iphone so I should be able to make this after work. I can bring tools if they are needed (like someone forgot to bring)

Bobby bought large sockets today...see you guys tomorrow, we are here if anyone wants to get started earlier

See you somewhere between 10:30 & 11:00.

Should be able to stop by, but not until 1:00 ish (kidos nap time!!).

Is this still going on. I get off at 4 and was thinking of stoping by

There's still a couple people there. Only work being done on Dutchboy's rig.

Hook-Em wrote:

There's still a couple people there. Only work being done on Dutchboy's rig.

Like always.


Good seein ya'll today.

Had a great time as always. Want to say thanks to Renee & Bobby to opening up their house and cooking us lunch.

Also want to give big thanks to Jeff and John for helping working on my jeep.

I know Renee took pictures, I'm sure she'll post up soon.